Asmodus Spruzza 80w Squonk Kit
Asmodus Spruzza 80w Squonk Kit.
We are proud to introduce our first regulated squonker mod, the Spruzza! Just as innovative as it is beautiful, the Spruzza is built around our own pump design, which we have dubbed the SSS (Smart Siphon System). Instead of squeezing an exposed bottle, all you have to do to feed juice into the atomizer is pull down on the lever located on the side of the device. The SSS has a whopping 6ml juice capacity, and can be easily filled by sliding up the glass door of the tank. We have pre-primed the pump system at the factory using VG for the easiest operation possible, and cleaning the tank is done by flushing out the pump with VG, no disassembly required. The Spruzza is powered by a GX-80-HUT chip which allows for wattage (power) mode, temperature control modes, TFR, TCR, and wattage curve mode. Curve allows the user to imitate the experience of temperature control mode by allowing the user to set 5 different wattage settings combined with 5 time presets up to a maximum of 10 seconds. For example if you were running a Clapton style coil, which typically require a little ramping to get to a firing sweet spot, you can set the device to fire at 80 watts for .2 seconds and then 65 watts for 5 seconds.
While curve mode might not be a change from the rest of our devices, how you switch between firing modes certainly is. To cycle through the firing modes, all you have to do is unlock the screen and swipe the mode symbol at the top to the left or the right. To switch between the different presets for temperature control, just press and hold the TEMP symbol. Adjusting what wattage or temperature the Spruzza fires at can be done by tapping the number located in the middle of the display, and to set your curve, press and hold. Clicking the firing button three times will lock the mod and stop it from firing, and clicking it five times will bring you to the menu, where you will find options for powering off the device, adjusting brightness, updating, checking the firmware version, and adjusting the puff counter.
Included with each Spruzza squonk mod is our new Fonte RDA, which is focused on flavor. The deck of the Fonte is a simple two post design with side-mounted screws, making it easy to build on, and the juice well has a convex shape that makes juice flow to the walls, where it will be absorbed by your wicks. We've machined the side airflow inlets at a downward angle to simulate a bottom-airflow design for improved flavor, which is enhanced by the conical top cap and wide-bore drip tip. The large heat sink on the top cap will help to get rid of excess heat, ensuring you can vape to your heart's content.
PRODUCTS MAY VARY FROM IMAGE, COLORS AND PATTERNS WILL AND ALWAYS VARY. YOU WILL RECEIVE A UNIQUE ONE GUARANTEED!
How to fill the Spruzza juice box
- 1.Remove the juice box
- 2.Fill juice box with juice
- 3.Pump it 10 times
- 4.Reinstall and squonk on!
- Requires 1x 18650 sized battery (not included)
- Touch screen type: Capacitive screen (Requires the electrical properties of the human body to detect when and where the display is touched)
- Wattage range (Power mode): 5W - 80W
- Wattage range (TC modes): 5W - 60W
- TC acceptable wire types: Ni200 Nickel, Ti Titanium, SS317 Stainless steel, SS316 Stainless steel, and SS304 Stainless steel
- Juice Capacity: 6ml
- Easy fill tank
- Easy to clean
- Touch and swipe technology
- Conical top cap
- Wide bore drip tip
- Directional airflow
- SSS pre-primed with VG
DO NOT DISASSEMBLE SMART SIPHON SYSTEM, IT IS NOT INTENDED TO BE TAKEN APART.